212 Resilient Wedge Gate Valves with Flanged Ends
2"-12" Resilient Wedge Gate Valves with Flanged Ends

Product Description

The AMERICAN Series 2500 Ductile Iron 250 psig AWWA Resilient Wedge Gate Valve is designed for use in drinking water, sewage and fire protection systems as well as irrigation and backflow control systems. The Series 2500 Resilient Wedge Gate Valve is furnished in configurations that are UL Listed and FM Approved.

Triple O-ring Stem Seals

Sealing the lubrication chamber is a series of three O-ring stem seals. The O-rings help to isolate the lubrication chamber.

Thrust Washers

Two thrust washers are used. One is located above, and one is located below the thrust collar. These thrust washers provide easy operation.

Ductile Iron Construction

The ductile iron body, bonnet and wedge provide strength and a pressure rating that meets or exceeds the requirements of AWWA C515. The tensile strength of ductile iron is more than twice that of cast iron. This added strength makes the Series 2500 more durable and rated at 250 psig. This strength and higher pressure rating is provided in a compact, lightweight and easy-to-handle ductile iron valve.

Fusion-Bonded Epoxy

The Series 2500 valve is epoxy coated on the interior and the exterior. The fusion-bonded epoxy coating is applied prior to assembly. The bolt holes and body-to-bonnet flange surfaces are fully epoxy coated.

O-ring Style Gaskets

The body-to-bonnet and stuffing box cover seals are pressure-energized O-rings. This reduces the need for excessive bolt loading, which is required by designs that use flat gaskets. The O-rings are reusable, which reduces downtime during any needed repair.

The Series 2500 Ductile Iron Resilient Wedge Gate Valve has these standard features:

  • UL Listed and FM Approved
  • 250 psig AWWA UL and FM pressure rating
  • Fusion-bonded epoxy coating complies with ANSI/AWWA C550
  • 4"–12" valves have a fully rubber-encapsulated wedge
  • Triple O-ring stem seals
  • Thrust washers
  • 4"–12" valves have a smooth, larger-than-nominal waterway
  • 100% leak-tight closure
  • 4" and larger sizes certified to NSF/ANSI standard 61
  • Complies with AWWA C515
  • 4"–12" valves have a ductile iron body
  • Also available in 4"–12" class 250 raised face, per ASME B16.1, class 250 for cast iron flanges

Request More Information

Add specific model info if applicable

Tell us more

Print Page