1466 Resilient Wedge Gate Valves with Flanged Ends Bevel Gear Actuator
14"-66" Resilient Wedge Gate Valves with Flanged Ends - Bevel Gear Actuator

14"–18" Class 125

14"–18" Class 250

SIZE 14" 16" 18"
B 35-3/16 39-3/4 43
B125 15 16 17
B250 18-1/2 21 22
C125 1-3/8 1-7/16 1-9/16
C250 2-1/8 2-1/4 2-3/8
D125 18-3/4 21-1/4 22-3/4
D250 20-1/4 22-1/2 24-3/4
DR 18-15/16 21-1/16 23-5/16
E125 12-1-1/8 16-1-1/8 16-1-1/4
E250 20-1-1/4 20-1-3/8 24-1-3/8
F 26 28-1/4 32
K125 21 23-1/2 25
K250 23 25-1/2 28
V 13-1/2 15-1/8 15

20"–36" Class 125

20"–36" Class 250

SIZE 20" 24" 30" 36"
B 44-7/16 52-5/8 62-5/8 74-3/8
B125 18 20 26 30
B250 24 26-3/8 32 37
C 10-3/8 10-3/8 13-9/16 15-3/8
C125 1-11/16 1-7/8 2-1/8 2-3/8
C250 2-1/2 2-3/4 3 3-3/8
D125 25 29-1/2 36 42-3/4
D250 27 32 39-1/4 46
DR 25-9/16 30-5/16 37-3/16 43-11/16
E125 20-1-1/4 20-1-3/8 28-1-3/8 32-1-5/8
E250 24-1-3/8 24-1-5/8 28-2 32-2-1/4
F 34-1/2 39 49 58
K125 27-1/2 32 38-3/4 46
K250 30-1/2 36 43 50
V 16-1/4 17-3/4 23 27-1/2

42"–54" Class 125

42"–54" Class 250

SIZE 42" 48" 54"
B 86-9/32 96 96
B125 38 43 48
B250 40 46-1/4 NA
C125 2-5/8 2-3/4 3
C250 3-11/16 4 NA
D125 49-1/2 56 62-3/4
D250 52-3/4 60-3/4 NA
DR 50-7/16 58-7/16 NA
E125 36-1-5/8 44-1-5/8 44 – 2
E250 36-2-1/4 40-2-1/4 NA
F 66-3/4 75-1/2 75-1/2
H 42-3/8 48-3/8 48-3/8
K125 53 59-1/2 66-1/4
K250 57 65 NA
V 31-1/4 34-1/4 34-1/4

60"–66" Class 125

SIZE 60" 66"
B 118 118
B125 53 58
C125 3-1/8 3-3/8
D125 69-1/4 76
E125 52 – 2 52 – 2
F 94-3/8 94-3/8
G 36-3/4 40-1/4
H 60-1/2 60-1/2
K125 73 80
V 41-3/16 41-3/16

NOTES

  1. Bolt patterns of class 125 flanged ends are in accordance with ASME/ANSI B16.1 class 125.
  2. Available in 14"–48" class 250 raised face, for cast iron flanges. Bolt patterns of class 250 flanged ends are in accordance with ASME/ANSI B16.1 class 250.
  3. Valves shall be epoxy coated per the requirements of ANSI/AWWA C550.
  4. Working pressure is 250 psig.
  5. Valve meets requirements ANSI/AWWA C515 where applicable.
  6. Valve is certified to ANSI/NSF Standard 61.
  7. Available in 14"–48" class 250 raised face, per ASME B16.1, class 250 for cast iron flanges.
  8. Open direction is specified by the customer.

Request More Information

Add specific model info if applicable

Tell us more

Print Page